• Vigor2760n
  • 1380x420 - ACS
  • Vigor2860Ln

How to Set CPE Parameter by the XML File?

СНПЧ А7 Пенза, обзоры принтеров и МФУ

This article describes the procedure for setting CPE parameter by .xml.

Step A : Check the complete parameter name

The complete function parameter name is needed to set the xml file. There are two ways to find the complete parameter name of CPE:

    Please refer to another FAQ : How to Show all Support Parameters of CPE on VigorACS SI 
    (/index.php?option=com_k2&view=item&id=2703:how-to-show-all-support-parameters-of-cpe-on-vigoracs-si&Itemid=293&lang=en)

    For example, you want to see all parameters under InternetGatewayDevice.ManagementServer.

    The telnet command is: sys tr069 get Int.Man.

1.telnet

 Step B : Compile XML file

 1. Setting profile

    For example, to set the following items on CPE:

LAN Setup

LAN IP = 192.168.5.1

Subnet Mask = 255.255.255.0

WAN Setup

PPPoA Enable

Username: Cette adresse e-mail est protégée contre les robots spammeurs. Vous devez activer le JavaScript pour la visualiser.

Password: password123

VPI = 0

VCI = 38

Protocol = PPPOA

Encapsulation = VCMUX

Modulation = Multimode

Wireless Setup

WLAN SSID1 = test123

WPA2 PSK = 12345678901234567890

    The following is the xml format for the above setting items. Simply change the device serial number for another device, then save it as a xml file.

<?xml version="1.0" encoding="UTF-8"?>

<tr069 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="tr069">

        <items>

                <item id="1" name="InternetGatewayDevice.X_00507F_WirelessLAN.General.EnableWLAN"/>

                <item id="2" name="InternetGatewayDevice.X_00507F_WirelessLAN.General.SSID.1.ESSID"/>

                <item id="3" name="InternetGatewayDevice.X_00507F_WirelessLAN.Security.1.Mode"/>

                <item id="4" name="InternetGatewayDevice.X_00507F_WirelessLAN.Security.1.WPAPSK"/>

                <item id="5" name="InternetGatewayDevice.LANDevice.1.LANHostConfigManagement.IPInterface.1.IPInterfaceIPAddress"/>

                <item id="6" name="InternetGatewayDevice.LANDevice.1.LANHostConfigManagement.IPInterface.1.IPInterfaceSubnetMask"/>

                <item id="7" name="InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.Enable"/>

                <item id="8" name="InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANDSLLinkConfig.DestinationAddress"/>

                <item id="9" name="InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANDSLLinkConfig.ATMEncapsulation"/>

                <item id="10" name="InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANDSLLinkConfig.LinkType"/>

                <item id="11" name="InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANDSLLinkConfig.ModulationType"/>

                <item id="12" name="InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.Username"/>

                <item id="13" name="InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPConnection.1.Password"/>

        </items>

        <devices>

                <device serialnumber="00507F708098" isreboot="true" >

                        <parameter id="1" iskeep="false" value="true"/>

                        <parameter id="2" iskeep="false" value="test123"/>

                        <parameter id="3" iskeep="false" value="WPA2/PSK"/>

                        <parameter id="4" iskeep="false" value="12345678901234567890"/>

                        <parameter id="5" iskeep="false" value="192.168.5.1"/>

                        <parameter id="6" iskeep="false" value="255.255.255.0"/>

                        <parameter id="7" iskeep="false" value="true"/>

                        <parameter id="8" iskeep="false" value="PVC:0/38"/>

                        <parameter id="9" iskeep="false" value="VCMUX"/>

                        <parameter id="10" iskeep="false" value="PPPoA"/>

                        <parameter id="11" iskeep="false" value="Multimode"/>   

                        <parameter id="12" iskeep="false" value=" Cette adresse e-mail est protégée contre les robots spammeurs. Vous devez activer le JavaScript pour la visualiser. "/>

                        <parameter id="13" iskeep="false" value="password123"/>

                </device>

        </devices>

</tr069>

 

Step C : Upload xml file to VigorACS SI server

Upload your xml file to VigorACS SI server. The setting profile will be implemented after the CPE sends info packets to VigorACS SI server.

Provision >> Provision Setting >> SettingProfile >> Upload file

2.ACS-upload

 

Step D : Check logs

You can check the setting profile status at:  
Log >> Device Action >> SettingProfileLog

3.ACS

  • News
    Evénements, Nouveauté
    Pour en savoir plus sur les nouveautés et événements DrayTek.
    Cliquez ici
    RES
    Informations produits
    Accédez ici à nos catalogues, solutions, produits, matrice produits, informations techniques...
    Cliquez ici
    IT
    Aides Technologies
    Accéder ici à notre rubrique Technologie, Etude de cas, Médiathéque, aides techniques...
    Cliquez ici
    SDA1
    Solutions d'affaires
    Accéder ici aux solutions d'affaires, que vous soyez une TPE, PME, micro-entreprise...
    Cliquez ici
     

NEWSLETTER

Nom (*)
Please let us know your name.
Email (*)
Please let us know your email address.