Article sections
Ce document explique la méthode de configuration d’un routeur Vigor en tant que serveur L2TP over IPsec ainsi que la fonction VPN intégrée à Windows 10 permettant d’établir une liaison VPN avec le routeur Vigor et l’accès au réseau LAN.
-
DrayOS
-
Linux
1. Make sure the router is connected to the Internet. Keep in mind the router’s WAN IP or domain name.
2. Go to VPN and Remote Access >> Remote Access Control Setup to make sure « Enable IPsec VPN Service » and « Enable L2TP VPN Service » are checked.
3. Create a remote dial-in user profile: Go to VPN and Remote Access >> Remote Dial-in User, click on an available index to edit the profile.
4. Edit the profile as follows:
- Check Enable this profile
- For Allowed Dial-In Type, check L2TP and set IPsec Policy to « Must »
- Give it a username and password
- Click OK to save.
5. Go to VPN and Remote Access >> IPsec General Setup, enter a Pre-Shared key and confirm it again. Then click OK to save.
Now, the router is ready for remote dial-in clients. Network Administrator may check the online users from VPN and Remote Access >> Connection Management page.
Establishing VPN from Windows 10
1. On Windows PC, go to Settings >> Network & Internet >> VPN, click Add a VPN Connection.
2. Enter the router’s WAN IP or domain name in Server name or address, select VPN type as “L2TP/IPsec with pre-shared key”, and enter the Pre-shared key we set in router’IPsec General Setup.
3. To establish the VPN, click on the VPN connection, and click Connect.
4. It will pop up a sign-in window, enter the username and password set in router’s VPN user profile.
5. If the credentials are correct, VPN will be connected.
Note: It’s recommended to change default IPsec Key Exchange algorithms for higher security.
It can be configured in Windows firewall with advanced security –> (right panel) Properties –> IPsec Settings –> Customize IPsec defaults –> Key Exchange (advanced)
Trouble-Shooting
If VPN cannot establish, you may enable more protocols for authentication for a try. Go to Control Panel > Network and Internet > Network Connections, right-click on the connection of VPN to Vigor, and Properties. In Security Tab, enable both « PAP » and « CHAP » for Authentication, then click OK to apply.
1. Navigate to User Management >> User Profile, click Add to add a new profile, and configure as followings:
- Check Enable
- Type Username and Password
- Select « Enable » for L2TP Dial-In
- Then click Apply to save the User profile.
2. Go to VPN >>Remote Access Control and check Enable L2TP VPN Service
3. Go to VPN >> IPsec General Setup and enter Preshared Key.
Establishing VPN from Windows 10
1. On Windows PC, go to Settings >> Network & Internet >> VPN, click Add a VPN Connection.
2. Enter the router’s WAN IP or domain name in Server name or address, select VPN type as “L2TP/IPsec with pre-shared key”, and enter the Pre-shared key we set in router’IPsec General Setup.
3. To establish the VPN, click on the VPN connection, and click Connect.
4. It will pop up a sign-in window, enter the username and password set in router’s VPN user profile.
5. If the credentials are correct, VPN will be connected.
Note: It’s recommended to change default IPsec Key Exchange algorithms for higher security.
It can be configured in Windows firewall with advanced security –> (right panel) Properties –> IPsec Settings –> Customize IPsec defaults –> Key Exchange (advanced)
Trouble-Shooting
If VPN cannot establish, you may enable more protocols for authentication for a try. Go to Control Panel > Network and Internet > Network Connections, right-click on the connection of VPN to Vigor, and Properties. In Security Tab, enable both « PAP » and « CHAP » for Authentication, then click OK to apply.
Related Articles
- IPsec Xauth depuis iOS vers un routeur Vigor
- Comment configurer une authentification d'un client VPN Dial-In distant par un serveur RADIUS?
- VPN IKEv2 à partir de macOS vers un routeur Vigor
- VPN SSL depuis Windows vers un routeur Vigor
- L2TP over IPsec depuis iOS vers un routeur Vigor
- VPN PPTP depuis le client Windows Smart VPN vers un routeur Vigor
- Utiliser VPN IKEv2 d'Android vers un routeur Vigor
- Qu’est-ce que VPN Matcher et comment l’utiliser ?