+33175432870
info@draytek.fr
12 rue des Chauffours
95000 Cery
Google map
Ce document explique la méthode de configuration d’un routeur Vigor en tant que passerelle SSL VPN afin de permettre aux clients smartphones Android d’accéder au réseau local avec un tunnel VPN SSL, vous trouverez la configuration requise pour le routeur ansi que la méthode pour initialiser la connexion VPN SSL depuis un téléphone android utilisant SmartVPN, le client VPN gratuit fourni par DrayTek.
1. Make sure the router is connected to the Internet and has a public WAN IP address so that VPN clients on the Internet can reach it.
2. At VPN and Remote Access >> Remote Access Control, make sure “SSL VPN Service” is enabled.
3. Create user profiles for SSL VPN clients. Go to VPN and Remote Access >> Remote Dial-in User. add a profile as follows:
1. Download and install Smart VPN APP from Google Play.
2. Start the App, and tap “+” to add a new profile.
3. Edit the profile as follows:
Note:
To enable server certificate authentication, it is required to install the relevant Root CA first.
If you check Use default gateway on remote network, all the Internet traffic will be sent to the VPN router while VPN is connected.
4. Tap the profile to start the SSL VPN connection.
5. Enter the Username and Password set in the router’s user profile, then tap Dial.
6. When the VPN is connected, the profile will turn green. Tap the profile again will disconnect it.
7. To edit or remove the profile, tap the pencil icon.
2. At VPN and Remote Access >> Remote Access Control, make sure “SSL VPN Service” is enabled.
3. Create user profiles for SSL VPN clients. Go to User Management >> User Profile, and click Add.
1. Download and install Smart VPN APP from Google Play.
2. Start the App, and tap “+” to add a new profile.
3. Edit the profile as follows:
Note:
To enable server certificate authentication, it is required to install the relevant Root CA first.
If you check Use default gateway on remote network, all the Internet traffic will be sent to the VPN router while VPN is connected.
4. Tap the profile to start the SSL VPN connection.
5. Enter the Username and Password set in the router’s user profile, then tap Dial.
6. When the VPN is connected, the profile will turn green. Tap the profile again will disconnect it.
7. To edit or remove the profile, tap the pencil icon.