>
>
Comment configurer un serveur VPN IKEv2 avec authentification EAP depuis macOS sur un routeur Vigor en utilisant Let’s Encrypt?
Comment configurer un serveur VPN IKEv2 avec authentification EAP depuis macOS sur un routeur Vigor en utilisant Let’s Encrypt?

Article sections

    DrayOS prend en charge la fonction de certificat Let’s Encrypt à partir de la version de firmware 3.9.0. Comme nous le savons, le certificat qui a été signé par Let’s Encrypt est un certificat valide. Ainsi, l’utilisation du certificat Let Encrypt sur les routeurs Vigor peuvent simplifier les étapes de configuration VPN pour différents clients VPN, notamment lorsqu’une connexion VPN avec authentification EAP est utilisée. Cet article explique comment configurer un serveur VPN IKEv2 sur un routeur Vigor à l’aide du certificat Let’s Encrypt et comment établir une connexion à partir de macOS.

    • DrayOS
    • MacOS

    Configurer le routeur Vigor

    1. Sélectionnez le bon fuseau horaire et assurez-vous que l’heure du système du routeur est correcte.

    2. Activez le service DrayDDNS sur votre routeur Vigor en vous référant à l’article ici.

    3. Appliquez le certificat Let’s Encrypt pour votre nom de domaine DrayDDNS en vous référant à l’article ici.

    4. Allez à la page VPN et Remote Access (accès à distance) >> IPsec General Setup page, sélectionnez DrayDDNS – le domaine utilisé pour appliquer le certificat Let’s Encrypt en tant que certificat d’appel entrant et entrez la General IPsec Pre-shared Key.

    2. Activate the DrayDDNS service on your Vigor Router referring to the article here.

    3. Apply the Let’s Encrypt certificate for your DrayDDNS domain name referring to the article here.

    4. Go to VPN and Remote Access >> IPsec General Setup page, select DrayDDNS – the Domain which used for applying Let’s Encrypt certificate as Certificate for Dial-in and enter the General IPsec Pre-shared Key.

    5. Go to VPN and Remote Access >> Remote Dial-in User page, click an available index. Edit the profile as follows:

    • Enable the account and enable IKEv2 EAP.
    • Give Username and Password
    • Click OK to save.

    1. Go to Network setting and click ‘ + ‘ to create a new service:

    • Select VPN for Interface.
    • Select IKEv2 for VPN Type.

    2. Enter the DrayDDNS domain of the router as Server Address and Remote ID.

    3. Click Authentication Settings…

    • Select Username for the Authentication Settings
    • Enter Username and Password.

    4. Click Connect, and check VPN status after the connection established successfully.

    Start typing and press Enter to search

    Shopping Cart

    Votre panier est vide.